20 KLD STP Plant in Chennai
RRR ENVIRO SYSTEMS provides 20 KLD Sewage Treatment Plant solutions for suitable residential, commercial, institutional and other wastewater treatment applications in Chennai, Tamil Nadu.
Our STP solutions can include process selection, equipment supply, installation, commissioning, operation support, maintenance and plant upgradation based on project requirements.
20 KLD STP – Quick Information
- Nominal Capacity: 20 KLD
- Approx. Treatment: 20,000 L/day
- Average Flow: approx. 0.83 m³/hr
- Domestic Sewage Treatment
- Biological Treatment
- Tertiary Treatment Options
- Disinfection System
- Treated Water Reuse Options
20 KLD Sewage Treatment Plant in Chennai
A 20 KLD STP Plant in Chennai is designed for a nominal sewage treatment capacity of approximately 20,000 litres per day.
The treatment system can be configured based on sewage characteristics, daily flow, peak flow, available installation area, treated-water reuse requirements and applicable project conditions.
RRR ENVIRO SYSTEMS supports suitable STP requirements in Chennai and Tamil Nadu with project-specific engineering and treatment configurations.
20 KLD STP Basic Details
- ✓ Capacity – 20 KLD
- ✓ Approx. Flow – 20,000 L/day
- ✓ Average Flow – approx. 0.83 m³/hr
- ✓ Biological Sewage Treatment
- ✓ Primary Treatment
- ✓ Secondary Treatment
- ✓ Tertiary Treatment – where required
- ✓ Disinfection – where required
Why Choose a 20 KLD STP Plant?
A properly designed 20 KLD sewage treatment system can provide a practical treatment solution for projects generating approximately 20,000 litres of sewage per day.
20,000 L/day Capacity
Designed around a nominal treatment capacity of approximately 20,000 litres per day.
Water Reuse
With suitable tertiary treatment and disinfection, treated water can be considered for approved non-potable reuse applications.
Technology Options
ASP, MBBR, SBR and MBR configurations can be evaluated according to the project requirements.
Project-Specific Design
Tank sizing, equipment selection and process configuration should be finalized after engineering evaluation.
Maintenance Support
Maintenance, equipment replacement and STP performance improvement services can be considered for existing plants.
Chennai Based
Project support is available for suitable requirements throughout Chennai and Tamil Nadu.
20 KLD STP Plant Technologies
The correct treatment technology depends on sewage quality, space availability, treated-water requirements, operation requirements and project conditions.
Activated Sludge Process
A suspended-growth biological treatment process using aeration followed by solid-liquid separation.
Moving Bed Biofilm Reactor
Uses biofilm carrier media inside the biological reactor to support microorganisms for wastewater treatment.
Sequencing Batch Reactor
A batch treatment process where biological treatment and settling are carried out through controlled cycles.
Membrane Bioreactor
Combines biological treatment with membrane separation for a compact treatment configuration.
20 KLD STP Treatment Process
The actual process flow will be finalized according to the selected STP technology and project-specific design.
Screening
Coarse solids are removed from incoming sewage during preliminary treatment.
Collection & Equalization
Sewage is collected and flow variations can be balanced where required.
Biological Treatment
Microorganisms treat biodegradable organic matter under controlled biological conditions.
Clarification
Biological solids are separated from treated water through a suitable separation stage.
Tertiary Filtration
Additional filtration can be provided according to the treated-water quality requirement.
Disinfection
Suitable disinfection can be provided before reuse or discharge.
Treated Water Tank
Treated water is collected for the intended application.
Sludge Management
Excess biological sludge is removed and managed through the selected sludge-handling arrangement.
20 KLD STP Plant – Technical Details
The following information is a general planning reference. Final design values must be established from actual site conditions and wastewater characteristics.
| Parameter | General Design Consideration |
|---|---|
| Nominal Capacity | 20 KLD |
| Daily Treatment Flow | Approximately 20,000 litres/day |
| Average Flow | Approximately 0.83 m³/hr when averaged over 24 hours |
| Technology | ASP / MBBR / SBR / MBR depending on project |
| Influent BOD | To be established from actual sewage characteristics |
| Influent COD | To be established from actual sewage characteristics |
| Influent TSS | To be established from actual sewage characteristics |
| Aeration System | Blower and diffuser arrangement according to process design |
| Tertiary Treatment | PSF / ACF / other suitable filtration as required |
| Disinfection | Chlorination / UV / other suitable system as applicable |
| Tank Construction | RCC / FRP / MS / other suitable MOC based on project design |
Equipment for 20 KLD STP Plant
Bar Screen
For removal of coarse solids and floating materials from incoming sewage.
Collection Tank
Provides sewage collection and equalization where required.
Air Blower
Supplies air required for aerobic biological treatment.
Fine Bubble Diffusers
Distributes air inside the aeration tank for efficient oxygen transfer.
Transfer Pumps
Used for transferring sewage, sludge or treated water between process stages where required.
Pressure Sand Filter
Additional suspended-solid filtration for suitable tertiary-treatment requirements.
Activated Carbon Filter
Polishing stage used for suitable applications where additional treatment is required.
Disinfection System
Provides final disinfection according to project requirements.
Electrical Control Panel
Controls pumps, blowers and other electrical equipment according to the selected automation arrangement.
20 KLD STP Plant Applications
A 20 KLD STP may be considered for projects where sewage generation is approximately within the plant's design capacity.
20 KLD STP Plant Service Areas
RRR ENVIRO SYSTEMS is based in Velachery, Chennai and supports suitable wastewater treatment requirements in Chennai and other locations in Tamil Nadu.
Treated Water Quality & STP Requirements
The required treated-water quality depends on the intended reuse or disposal route and the applicable project requirements.
For Chennai projects, the applicable sewage-treatment requirements should be checked against the relevant authority conditions and project approvals.
RRR ENVIRO SYSTEMS can recommend appropriate biological, tertiary filtration and disinfection stages according to the required application and site conditions.
20 KLD STP Plant in Chennai – FAQs
What is a 20 KLD STP Plant?
A 20 KLD Sewage Treatment Plant is a wastewater treatment system designed for a nominal capacity of approximately 20,000 litres of sewage per day.
What is the average flow of a 20 KLD STP?
20 KLD equals approximately 20,000 litres per day, which corresponds to approximately 0.83 m³/hr when averaged over 24 hours. Actual plant design must also consider peak flow conditions.
Which technology is suitable for a 20 KLD STP?
ASP, MBBR, SBR and MBR can be considered depending on the site conditions, wastewater characteristics, available space, operating requirements and treated-water quality requirements.
Can a 20 KLD STP treated water be reused?
Depending on the treatment quality and applicable requirements, treated water may be considered for suitable non-potable uses such as gardening or toilet flushing.
Does RRR ENVIRO SYSTEMS supply 20 KLD STP Plants in Chennai?
RRR ENVIRO SYSTEMS provides suitable STP project support including equipment supply, installation, commissioning, maintenance and upgradation based on project scope.
How can I get a quotation for a 20 KLD STP?
Contact RRR ENVIRO SYSTEMS at 9710035249 or 9962395875, or email rrrenviro1@gmail.com with your location, application and sewage-generation details.
Need a 20 KLD STP Plant in Chennai?
Contact RRR ENVIRO SYSTEMS for 20 KLD sewage treatment plant requirements, STP equipment supply, installation, commissioning, maintenance and service support.
